16.5ft Black With Fence Square Food Trailer for Pizza

Overall dimensions (L×W×H): 16.5 × 6.5 × 7.7 ft, customizable

Body type: A square, flat-panel body

Approx. unit weight: 1000kg

Color: Black or Customizable

Standard electrics: 110 V / 3.6 kW or 220 V / 7.5 kW supply

Sockets: Six sockets on bodies up to 4 m, eight above 4 m

Certification set: CE / DOT / VIN / UL / NSF

Brakes: Mechanical and hand brake; overrun or electric brake options

Description

The 16.5 ft black square food trailer pairs a square, flat-panel body with a layout intended for daily service. You get a 16.5 ft working platform in black with a fenced serving deck, with the internal layout drawn to your equipment list.

The Video tab shows this actual unit on camera, which is the quickest way to judge the finish and the serving setup.

How the 16.5 ft black square food trailer is laid out for service

The fenced deck adds a usable standing and queuing edge, which helps at festivals and private sites where customers walk up to the unit.

The 16.5 ft measurement refers to the body, and the drawing shows exactly how much of it becomes usable counter and how much is taken by appliances and storage.

As configured, the 16.5ft Black With Fence Square Food Trailer for Pizza is listed at 16.5 × 6.5 × 7.7 ft and around 1000kg; those figures change if you alter the body or the equipment set.

Specified for pizza service

A pizza build starts with the oven, not the counter. Its weight, flue route and heat shielding are fixed first, then the make table, dough storage and peel racks are arranged around the working arc of the oven.

  • a make table with chilled ingredient pans
  • a pizza oven position with a heat-shielded flue
  • dough prep and proofing storage
  • peel and tray storage beside the oven

A wood-fired oven needs a different flue and clearance approach from a gas deck oven, so we ask for the oven model before drawing the structure.

Where it fits: a brewery or venue partnership

For a residency at a bar or taproom, the kitchen usually runs a short menu for long hours. We can specify robust equipment and generous holding space rather than a wide, complicated line.

Build schedule and export documents

A typical build window runs 30-45 days from a signed drawing, with progress photos during fabrication and a walkthrough video before crating. Every unit leaves in a timber crate, with container planning based on the final dimensions.

Build quality and towing

Chassis, axles and brakes are specified once the equipment list is known, because a fully fitted unit weighs considerably more than the bare body.

For overseas buyers we also confirm the coupling and lighting arrangement expected in your market before fabrication.

Interior materials are selected against the daily cleaning routine rather than the showroom photo.

Compliance follows the destination market: say where this 16.5FT body is going and the NSF and UL items that apply are listed back to you.

Buyers looking at the 16.5ft Black With Fence Square Food Trailer for Pizza often also consider the 13FT Red Single Window Square Food Trailer with Fence; the useful difference to check is body style and serving layout, not just the colour.

Customising this unit

Because the body is fabricated to order, changes are easier now than later. Window style, body dimensions, running gear, electrical capacity and interior finish can all be adjusted; the Options & Upgrades tab lists the common requests.

Tell us your menu, your serving window preference and the country the unit will work in, and we will come back with a drawing and a quotation.

Compare with 13FT Grey Single Window Square Food Trailer if you are still choosing a body style.

Standard equipment for this square food trailer

  • interior lighting, distribution board and accessible cable runs
  • stainless worktop and prep area with a sink and water pump
  • peel and tray storage beside the oven
  • fresh and waste water tanks with a separate hand-wash route
  • a make table with chilled ingredient pans
  • a pizza oven position with a heat-shielded flue
  • one large service window or two smaller windows
  • dough prep and proofing storage

Wheels and tyres

  • steel or alloy rims from 13 to 15 inch
  • higher load-rated tyres per axle set
  • a tyre band chosen for your towing route

Power and wiring

  • heavier-gauge wiring to UL or CE requirements
  • dual circuit or three-phase supply
  • extra sockets; ETL shore-power inlet

Crating and freight

  • crate-only supply or crated delivery to a named port
  • a loading plan based on the finished unit

Running gear

  • jockey wheel, 1.2 t or 1 t rating
  • additional axle; 2 t coupling with overrun brake
  • leaf-spring or torsion axle set by load band
  • chassis load upgrade; electric-brake torsion axle
  • hand-pull version without axles, wheels and jack

Interior finishes

  • solid wood counter, wood-grain interior or wallpaper
  • reworked cabinets, stainless drawers and a pull-out bin base
  • vinyl flooring and pizza oven installation, with or without a base
  • crystal-carbon or marble-look wall panels; not available on curved or door faces

Notes for this 16.5 ft body

  • layout changes are drawn against the 16.5 ft shell, so window position and counter length are confirmed before any upgrade is quoted

Size changes

  • a wider, taller or longer body
  • dimension changes confirmed against towing limits and container loading

Exterior

  • camper door lock and alloy wheel arch
  • manual or electric awning; sheet-metal face upgrade where required
  • an extra service door and sliding windows in either direction
  • extra service windows; folding and three-fold window styles
  • alternative bumper trim styles for rounded bodies

Build time

Production normally takes 30-45 days after drawing approval, with photo updates along the way and a video inspection before packing.

Packing

  • export timber crate, chassis secured and service side protected
  • loading plan drawn from the final measurements
  • delivery to port or crate-only collection

Export paperwork

  • vehicle identification and chassis plate details
  • market-specific certification documents as ordered
  • paperwork released before shipment

What happens after delivery

  • build-sheet warranty with named covered components
  • clear separation between warranty parts and wear items
  • remote assistance for wiring, water and window adjustments
  • consolidated spare-part shipments on request
Go to Top