11.5FT Pink Single Window Square Food Trailer

Overall dimensions (L×W×H): 11.5 × 6.5 × 7.7 ft, customizable

Body type: A square, flat-panel body

Approx. unit weight: 600kg

Color: Pink or Customizable

Standard electrics: 110 V / 3.6 kW or 220 V / 7.5 kW supply

Sockets: Six sockets on bodies up to 4 m, eight above 4 m

Certification set: CE / DOT / VIN / UL / NSF

Brakes: Mechanical and hand brake; overrun or electric brake options

Description

The 11.5 ft pink square food trailer pairs a square, flat-panel body with a layout intended for daily service. It is a 11.5 ft unit in pink with a single service window, and every build is confirmed on a production drawing before fabrication starts.

The working layout of this square food trailer

Service runs through a single service window, with the sill height chosen so staff can hand over orders comfortably during a long shift.

Choosing a 11.5 ft shell keeps the unit manageable on the road while still allowing a sensible two-person workflow inside.

As configured, the 11.5FT Pink Single Window Square Food Trailer is listed at 11.5 × 6.5 × 7.7 ft and around 600kg; those figures change if you alter the body or the equipment set.

Specified for street food service

The cooking line is arranged after we see your menu, because a unit built for burgers should not share a layout with one built for noodles. Water in, waste out and power distribution are resolved in the same layout pass as the equipment.

  • a serving shelf and condiment rail at the window
  • a sink station with a separate hand-wash section
  • a griddle and fryer line with a stainless backsplash
  • a prep and plating counter with under-cabinet storage

We treat the drawing as the working document: equipment first, then services, then finishes. That is how a 11.5FT comes out trade-ready rather than showroom-ready.

How the unit is built

Axle choice is not guesswork: it follows the calculated weight of your equipment, water and stock. Hilly routes and gravel lots are handled by upgrading brakes and tyres rather than accepting the stock setup.

Insulated panels hold temperature down and cut condensation; the stainless lining is what makes the daily hose-down quick.

Documentation follows the order: if your importer or local authority asks for NSF-aligned food equipment or UL-listed wiring, that requirement is written into the build sheet.

Build schedule and export documents

Most orders reach the crated stage within 30-45 days of drawing approval, with photos during the build and a video inspection before shipment.

A unit for construction and industrial site catering

Industrial sites usually mean early starts and rough access roads. Tell us the route and we will choose the axle and tyre band with that in mind.

Buyers looking at the 11.5FT Pink Single Window Square Food Trailer often also consider the 13FT Light Purple Square Concession Food Trailer, Fully Equipped Mobile Food Kitchen; the useful difference to check is body style and serving layout, not just the colour.

Customising this unit

Use the Options & Upgrades tab as a checklist before you ask for a drawing. Common additions: awning, extra glazing, heavier wiring, more sockets, upgraded wheels and extra storage.

Get the drawing before the deposit — two layouts can be compared side by side at no cost.

Standard equipment for this square food trailer

  • a prep and plating counter with under-cabinet storage
  • a griddle and fryer line with a stainless backsplash
  • fresh and waste water tanks with a separate hand-wash route
  • one large service window or two smaller windows
  • interior lighting, distribution board and accessible cable runs
  • stainless worktop and prep area with a sink and water pump
  • a sink station with a separate hand-wash section
  • a serving shelf and condiment rail at the window

Chassis, axles and brakes

  • jockey wheel, 1.2 t or 1 t rating
  • an extra axle and a 2 t overrun-brake coupling
  • leaf-spring or torsion axles matched to the build weight
  • chassis load upgrade; electric-brake torsion axle
  • a hand-pull build with no axles or wheels

Notes for this 11.5 ft body

  • layout changes are drawn against the 11.5 ft shell, so window position and counter length are confirmed before any upgrade is quoted

Interior

  • solid wood counters, wood-grain panels or interior wallpaper
  • cabinet rework; stainless drawers and pull-out bin base
  • vinyl flooring and pizza oven installation, with or without a base
  • crystal-carbon or marble-look wall panels, excluding curved and door faces

Exterior

  • camper door lock and alloy wheel arch
  • manual or electric awning; sheet-metal face upgrade where required
  • an extra service door and sliding windows in either direction
  • additional serving windows, including folding and three-fold styles
  • alternative bumper trim styles for rounded bodies

Power and wiring

  • UL or CE certified wiring in heavier gauges
  • a dual circuit or three-phase supply
  • additional sockets and an ETL shore-power inlet

Wheels and tyres

  • 13-15 inch rims in steel or alloy
  • higher load-rated tyres per axle set
  • a tyre band chosen for your towing route

Crating and freight

  • crate-only supply or crated delivery to a named port
  • loading plan confirmed with finished dimensions

Size changes

  • body width or height increase; extra body length
  • size changes checked against towing limits and container space

Production window

The usual window is 30-45 days from a signed drawing, including photo reporting during fabrication and a recorded inspection before crating.

Shipping

  • secure timber crate with chassis restraints
  • container quantities worked out from the finished size
  • crated delivery to your chosen port

Paperwork

  • identification plate and chassis documentation
  • certificates required for your destination
  • documents supplied before the container arrives

What happens after delivery

  • build-sheet warranty with named covered components
  • clear separation between warranty parts and wear items
  • remote assistance for wiring, water and window adjustments
  • consolidated spare-part shipments on request
Go to Top