Description
The 10 ft pink square food trailer starts with a square, flat-panel body and leaves the working layout open until your drawing is signed. This is the base configuration — layout, services and finishes are decided with you.
The working layout of this square food trailer
A 10 ft shell gives enough counter length to separate preparation, cooking and serving into distinct zones instead of one crowded bench.
Service runs through a single service window, with the sill height chosen so staff can hand over orders comfortably during a long shift.
As configured, the 10FT Glossy Pink Single‑Window Square Concession Food Trailer is listed at 10 × 6.5 × 7.7 ft and around 600kg; those figures change if you alter the body or the equipment set.
How this unit handles street food service
We normally start the drawing with the heaviest appliance and work outwards, because its weight and heat decide where everything else can go.
- a serving shelf and condiment rail at the window
- a sink station with a separate hand-wash section
- a prep and plating counter with under-cabinet storage
- a griddle and fryer line with a stainless backsplash
We treat the drawing as the working document: equipment first, then services, then finishes. The sequence is deliberate: working capacity first, surface finish second.
Production time and delivery
We quote production as a 30-45 day window rather than a fixed date, because custom fabrication depends on the options you choose.
What can be changed before production
Buyers who plan to expand later usually add spare circuit capacity now, because it costs far less than rewiring a finished unit.
Thinking about a food park or shared pitch?
Shared pitches have shared rules: extraction, waste and power are often fixed by the site. Send us those requirements and we will build to them instead of discovering conflicts on arrival.
Buyers looking at the 10FT Glossy Pink Single‑Window Square Concession Food Trailer often also consider the 23FT Bright Red Square Food Trailer | Large Commercial Mobile Catering Kitchen; the useful difference to check is body style and serving layout, not just the colour.
Construction details that matter
Axle choice is not guesswork: it follows the calculated weight of your equipment, water and stock.
For overseas buyers we also confirm the coupling and lighting arrangement expected in your market before fabrication.
Finishes are picked for what a health inspector looks at: smooth, sealed, cleanable surfaces.
Give us the destination state or country first; the NSF and UL paperwork for this build is then assembled against that market checklist.
Share the number of staff and the menu range, and the internal layout is proposed before pricing.