7.2FT Pink Small Round Food Trailer with Sunshade

Overall dimensions (L×W×H): 7.2 × 5.73 × 7.7 ft, customizable

Body type: A compact rounded pod body

Body material: Stainless Steel or Galvanized Sheet

Sink station: 3+1 Sink or Double Sinks

Approx. unit weight: 500Kg

Standard electrics: 110 V / 3.6 kW or 220 V / 7.5 kW supply

Sockets: Six sockets on bodies up to 4 m, eight above 4 m

Certification set: CE / DOT / VIN / UL / NSF

Brakes: Mechanical and hand brake; overrun or electric brake options

Description

The 7.2 ft pink small round trailer starts with a compact rounded pod body and leaves the working layout open until your drawing is signed. Everything outside the base configuration is confirmed at drawing stage, which is why the finished 7.2FT fits the real work.

The working layout of this small round trailer

A 7.2 ft body lets us place the cooking line and the serving window on the same side without squeezing the prep area.

As configured, the 7.2FT Pink Small Round Food Trailer with Sunshade is listed at 7.2 × 5.73 × 7.7 ft and around 500Kg; those figures change if you alter the body or the equipment set.

Equipment and workflow for street food vendors

If you intend to change the menu seasonally, say so: we can leave spare circuit capacity and a counter position that accepts a different appliance later.

  • a serving shelf and condiment rail at the window
  • a prep and plating counter with under-cabinet storage
  • a sink station with a separate hand-wash section
  • a griddle and fryer line with a stainless backsplash

Storage is usually the difference between a tidy shift and a chaotic one, so we plan dry goods, packaging and cleaning supplies as three separate zones.

Production time and delivery

A typical build window runs 30-45 days from a signed drawing, with progress photos during fabrication and a walkthrough video before crating. Timber crates with chassis restraints, and container loading planned against the measured finished size.

Build quality and towing

The body sits on a fabricated chassis with corner jacks, and axle and brake options are chosen against the finished weight of the build.

For overseas buyers we also confirm the coupling and lighting arrangement expected in your market before fabrication.

The shell is built from stainless steel or galvanized sheet, with insulation that helps both refrigeration and general working comfort.

If your buyer or inspector needs a named standard, we build to it: NSF for food equipment and UL for electrical work are the two most common requests from US importers.

A unit for a festival and fair circuit

On a fairground the unit is both kitchen and billboard. A wrapped body, working lighting and a serving shelf that handles a queue will do more for daily takings than any decorative extra.

Buyers looking at the 7.2FT Pink Small Round Food Trailer with Sunshade often also consider the 8.2FT Glossy Green Curved Round Food Trailer | Mobile Snack Cart; the useful difference to check is body style and serving layout, not just the colour.

Options worth considering

Most buyers change at least one thing on this base model: a different window arrangement, an awning over the serving side, a wider or taller body, upgraded axles and wheels, extra sockets or a heavier circuit, and interior finishes such as stainless drawers, wood-grain panels or vinyl flooring. The complete add-on list sits in the Options & Upgrades tab.

Get the drawing before the deposit — two layouts can be compared side by side at no cost.

Standard equipment for this small round trailer

  • a prep and plating counter with under-cabinet storage
  • stainless worktop and prep area with a sink and water pump
  • a serving shelf and condiment rail at the window
  • a sink station with a separate hand-wash section
  • a griddle and fryer line with a stainless backsplash
  • one large service window or two smaller windows
  • fresh and waste water tanks with a separate hand-wash route
  • interior lighting, distribution board and accessible cable runs

Electrical

  • heavier-gauge wiring to UL or CE requirements
  • dual circuit or three-phase supply
  • additional sockets and an ETL shore-power inlet

Size changes

  • a wider, taller or longer body
  • dimension changes confirmed against towing limits and container loading

Inside the kitchen

  • solid wood counters, wood-grain panels or interior wallpaper
  • reworked cabinets, stainless drawers and a pull-out bin base
  • vinyl flooring and pizza oven installation, with or without a base
  • crystal-carbon or marble-look wall panels, excluding curved and door faces

Wheels and tyres

  • 13-15 inch rims in steel or alloy
  • higher load-rated tyres per axle set
  • tyre choice matched to your route and towing weight

Exterior

  • a camper-style door lock and alloy wheel arches
  • manual or electric awning; sheet-metal face upgrade where required
  • an extra service door and sliding windows in either direction
  • extra service windows; folding and three-fold window styles
  • alternative bumper trim styles for rounded bodies

Notes for this 7.2 ft body

  • layout changes are drawn against the 7.2 ft shell, so window position and counter length are confirmed before any upgrade is quoted

Chassis and axles

  • jockey wheel, 1.2 t or 1 t rating
  • an extra axle and a 2 t overrun-brake coupling
  • leaf-spring or torsion axle set by load band
  • chassis load upgrade; electric-brake torsion axle
  • a hand-pull build with no axles or wheels

Crating and freight

  • crate-only supply or crated delivery to a named port
  • a loading plan based on the finished unit

Production window

The usual window is 30-45 days from a signed drawing, including photo reporting during fabrication and a recorded inspection before crating.

Shipping

  • secure timber crate with chassis restraints
  • container quantities worked out from the finished size
  • crated delivery to your chosen port

Paperwork

  • identification plate and chassis documentation
  • certificates required for your destination
  • documents supplied before the container arrives

After-sales support

  • written warranty terms issued with your build documentation
  • wear components listed separately from covered parts
  • remote fault-finding by video for electrics, plumbing and windows
  • replacement parts added to your next shipment
Go to Top