8.2FT Glossy Green Round Food Trailer

Overall dimensions (L×W×H): 7.2 × 5.73 × 7.7 ft, customizable

Body type: A compact rounded pod body

Body material: Stainless Steel or Galvanized Sheet

Sink station: 3+1 Sink or Double Sinks

Approx. unit weight: 500Kg

Standard electrics: 110 V / 3.6 kW or 220 V / 7.5 kW supply

Sockets: Six sockets on bodies up to 4 m, eight above 4 m

Certification set: CE / DOT / VIN / UL / NSF

Brakes: Mechanical and hand brake; overrun or electric brake options

Description

Among our small round trailers, the 8.2 ft green small round trailer is a strong base for a custom build. Nothing beyond the base specification is fixed until your equipment list and the site survey are settled.

Layout and serving setup of the 8.2 ft green small round trailer

At 8.2 ft of body length there is room for a prep line along one wall and a clear service run along the other, so two people can work without crossing at the window.

As configured, the 8.2FT Glossy Green Curved Round Food Trailer | Mobile Snack Cart is listed at 7.2 × 5.73 × 7.7 ft and around 500Kg; those figures change if you alter the body or the equipment set.

Specified for street food service

Good trailer kitchens feel boring to work in, in the best way: everything has a place, nothing needs moving mid-service, and cleaning is straightforward.

  • a serving shelf and condiment rail at the window
  • a prep and plating counter with under-cabinet storage
  • a sink station with a separate hand-wash section
  • a griddle and fryer line with a stainless backsplash

Storage is usually the difference between a tidy shift and a chaotic one, so we plan dry goods, packaging and cleaning supplies as three separate zones.

A unit for a multi-unit rollout

Multi-unit buyers should fix the first build carefully, because every later unit inherits it. We document the layout, services and finishes so reorders need no redesign.

How the unit is built

The frame is built to carry a working kitchen, including the dynamic loads of towing with equipment fitted. Hilly routes and gravel lots are handled by upgrading brakes and tyres rather than accepting the stock setup.

Body construction uses stainless steel or galvanized sheet with an insulated panel build, so the interior can be cleaned down and holds temperature around refrigeration and cooking equipment.

For US importers we routinely build to NSF food-equipment expectations and UL wiring practice — name the destination state or country and the document set is confirmed before production.

What can be changed before production

The drawing stage is where you can be demanding: window position, counter height, storage layout and finish are all easier to change on paper than in steel.

Buyers looking at the 8.2FT Glossy Green Curved Round Food Trailer | Mobile Snack Cart often also consider the 7.2FT Pink Small Round Food Trailer with Sunshade; the useful difference to check is body style and serving layout, not just the colour.

Build schedule and export documents

From drawing approval to crated unit, the normal window is 30-45 days. The video walkthrough replaces a site visit: every station is shown before the crate is sealed.

Get the drawing before the deposit — two layouts can be compared side by side at no cost.

Standard equipment for this small round trailer

  • fresh and waste water tanks with a separate hand-wash route
  • a serving shelf and condiment rail at the window
  • interior lighting, distribution board and accessible cable runs
  • a prep and plating counter with under-cabinet storage
  • a griddle and fryer line with a stainless backsplash
  • one large service window or two smaller windows
  • stainless worktop and prep area with a sink and water pump
  • a sink station with a separate hand-wash section

Size changes

  • a wider, taller or longer body
  • size changes checked against towing limits and container space

Electrical

  • heavier-gauge wiring to UL or CE requirements
  • a dual circuit or three-phase supply
  • additional sockets and an ETL shore-power inlet

Wheels, tyres and hubs

  • 13-15 inch rims in steel or alloy
  • higher load-rated tyres per axle set
  • tyre choice matched to your route and towing weight

Exterior and serving side

  • camper door lock and alloy wheel arch
  • a manual or electric awning, with body reinforcement where needed
  • additional service door; horizontal or vertical sliding windows
  • extra service windows; folding and three-fold window styles
  • alternative bumper trim styles for rounded bodies

Chassis, axles and brakes

  • jockey wheel upgrade in two load ratings
  • additional axle; 2 t coupling with overrun brake
  • leaf-spring or torsion axles matched to the build weight
  • a heavier chassis rating and electric-brake torsion axles
  • a hand-pull build with no axles or wheels

Interior finishes

  • solid wood counter, wood-grain interior or wallpaper
  • reworked cabinets, stainless drawers and a pull-out bin base
  • vinyl flooring; pizza oven installation with or without base
  • crystal-carbon or marble-look wall panels; not available on curved or door faces

Notes for this 8.2 ft body

  • layout changes are drawn against the 8.2 ft shell, so window position and counter length are confirmed before any upgrade is quoted

Crating and freight

  • crate only; crated delivery to Qingdao or another port
  • a loading plan based on the finished unit

Production window

The usual window is 30-45 days from a signed drawing, including photo reporting during fabrication and a recorded inspection before crating.

Shipping

  • secure timber crate with chassis restraints
  • container quantities worked out from the finished size
  • crated delivery to your chosen port

Paperwork

  • identification plate and chassis documentation
  • certificates required for your destination
  • documents supplied before the container arrives

Warranty and parts

  • coverage and duration confirmed in writing with the order
  • consumables and wear items identified up front
  • video-call support for setup and troubleshooting
  • spare parts packed with later shipments when needed
Go to Top