A 16 ft Box Trailer, One Working Kitchen

The finished 4.9 m box trailer in the customer's full wrap, ready for loading
4.9mLength2.0 m wide / 2.35 m high
16Items fittedGas, cold, power
10kWGeneratorRuns AC and three fridges
7-9Lead timeWeeks from drawing sign-off
01

The brief

She was not ordering a trailer. She was ordering a kitchen she could cook with fire in.

Arkansas is a street-side business. The equipment list she sent was blunt: shawarma machine, 30 L fryer, griddle, grill, and a four-burner gas range with oven. Five open-flame units, plus a fridge, a drinks cabinet and a 300 L freezer, three cold points.

The order was a single unit: 4.9 m long, 2.0 m wide, 2.35 m high, tandem axle, four jacks. One trailer does not fill a container, so it ships LCL, CIF Memphis.

02

Three conditions decided everything else

  • Open flame first, so gas and power run on separate lines. Every cooking unit runs on gas; electricity only carries refrigeration, air conditioning and lighting. If one line fails, the other still works.
  • One unit only, so the floor plan comes first. The three work zones are fixed before equipment is placed. If a machine does not fit, the model changes, not the plan.
  • LCL shipping, so the packing is built with the trailer. The timber base is cut to the body size, the forklift touches only the base, corners and glass get extra protection.

Equipment on board

  • Gas shawarma machine – 540 x 640 x 1050 mm
  • 30 L gas fryer – 396 x 702 x 1088 mm
  • Gas griddle – 730 x 530 x 330 mm
  • Refrigerated worktop – 1500 x 600 x 800 mm

Body specification

  • Length 4900 mm, width 2000 mm, internal height 1950 mm
  • Tandem axle, four jacks, full vinyl wrap
  • Three sinks with prep top and stainless under-counter storage
  • Gas bottle box and generator box mounted outside the body
PLAN VIEW4.9 m box trailer — 4,900 x 2,000 mmPrep & sinkGriddle bank5 unitsFridge run3 unitsGenerator10 kWServing window 1,050 mmoverall lengthoverall widthGas bank and extraction hood sit above the cooking zone.
Indicative layout — dimensions in millimetres.
03

Filling 4.9 m

4.9 m is not a long body. To stand five flame units, three cold points, three sinks and a cash position in it, the plan has to be laid out before the specification is discussed.

Front: water and washing

  • Three sinks, prep surface, stainless storage under the counter
  • Washing and preparation done within one turn of the body

Middle: the flame line

  • Four-burner range, fryer, griddle and grill in one run
  • Full-length extraction hood and fire suppression above

Rear: cold and cash

  • Fridge, worktop and cash drawer on the service side
  • Serving and payment on the same flow

Outside: gas and power

  • Gas bottle box and generator box on the rear body
  • Zero interior space used
4900mmLength
2000mmWidth
1950mmInternal height
Inside the 4.9 m box trailer: stainless worktops, five burner positions and the extraction hood
04

One fire line, one power line

Cookers on gas, refrigeration and air conditioning on electricity. Split the two and a single total load can no longer cap the whole trailer. Servicing is easier too: shut the gas without touching the power, shut the power without touching the gas.

A 10 kW diesel set still has headroom with one air conditioner and three fridges. The AC draws about 0.9 kW, the three fridges about 0.9 kW, lighting and lightbox about 0.3 kW, so normal simultaneous load stays under 3 kW. The rest is not waste, it is what covers compressor start-up.

10kWDiesel generator950 x 550 x 770 mm
3kWNormal loadAC, fridges, lighting
0Site power neededGenerator travels with the trailer

The trailer does not depend on site power: the generator travels with it, so it can fire up the moment it lands.

05

One trailer, shipped LCL

One trailer does not fill a container, so it ships LCL. The hard part of LCL is not loading, it is protection. In a 40HQ the timber base takes 5.1 m and the remaining 6.9 m is shared with other cargo.

  • Timber base. The body goes onto the base before loading, and the forklift never touches the trailer itself.
  • Full wrap. Film wrap and corner guards hold off pressure from the cargo sharing the container.
  • Arrival. CIF Memphis, with CI, PL and B/L travelling with the container so no document is left waiting.

Can other cargo crush it?

No. The base separates the body from the container floor, and corner guards take the impact instead of the panels.

Can it tip over at sea?

The base is fixed to timber bearers on the container floor, the centre of gravity is marked on the case and turned inward when the load is planned.

What about moisture?

Desiccant goes inside, electrical components are double-wrapped, and the container doors stay closed for the whole voyage.

06

From order to arrival

7-9Weeks lead timeAfter drawing sign-off
CIFMemphisLCL, documents complete
12Months warrantyFactory responsible
  • Drawing sign-off. Drawings one week after deposit; once confirmed they lock and do not change.
  • Weekly production report. A progress photo every week, so the build is visible as it happens.
  • Pre-shipment test. Power on, burners lit, photographed and filed before the balance is paid.
  • Shipping documents. Loading photos and papers handed over in one go with the shipment.

From drawing to first flame, this trailer is 16 items, two lines and one LCL booking. The next one starts with the same question: what are you going to cook in it?

Belyoo / Food trailer cases

Plan the floor, then talk equipment.

Send us your menu and your site. We will tell you what fits in 4.9 m, and what does not.

Get a quote